How Do You Solder 3 Wires Together

Before soldering make sure there is a good mechanical connection.

How do you solder 3 wires together. Apply solder to the top until molten solder wicks into the joint. You do not want your longer wire to touch any of the wires you just connected so you can use a piece of the heat shrink tubing or some electrical tape to cover the other wires. Shrink tubing is the best way to seal soldered connections.

Step 6 - Twist the Connector On. There are three main ways to solder wires. You can use solder on the splice after youve twisted it enough but you cant depend upon the solder to hold the splice together.

Soldering is the process of melting two wire ends together to join them. The most secure and durable way to splice two wires together is to solder them. The first step is you need to strip your wires.

Once the solder has cooled simply slide the tubing over the joint and use a lighter or heat gun to shrink it. Then you wrap the loose end of one wire around the other and then repeat for the other wire. Step 5 - Place the Connector Over the Ends of the Wires.

Make sure you slide the tubing a few inches past the joint BEFORE soldering. You need to position the wires so they dont move while soldering. This is to protect your eyes if in case there will be accidental hot metal splashes while performing the procedures.

You might add a it more Bakers Fluid while this is going on. Hold it on the wire for 3-4 seconds. How to Use Electrical Wire Connectors.