How To Solder Copper Pipe With A Heat Gun

Hold the heat gun with one hand and use a putty knife or scraper to go along behind the gun and scrape away the loosened paint.

How to solder copper pipe with a heat gun. When youre done soldering dissolve the plug. Hold the solder to the joint you are trying to solder. Soldering irons and guns are better suited to electrical soldering or stained glass.

You must use flux and lead-free solder to solder copper pipes together without. Touch the Solder to the Pipe. When you use a propane torch you must give the heat a chance to soak into the copper pipe connection which can take anywhere from 30 to 60 seconds.

Bending plastic pipes - 200 to 300C. 2 Do NOT rub bump or move in any way until the solder has cooled and is fully solid. Step By Step Guide On How To Solder Copper Pipes.

Squiggle a line like you would with glue. Place the tip of the solder at the point where the solder iron tip and part you are soldering meet. Another great tool to consider using for soldering copper pipe is a propane torch.

I wouldnt say never use a heat gun for soldering pipes together. Apply the solderless copper bonding to the pipe. Most heat guns will have a built in safety thermal heat switch which will terminate the device if a dangerous heat level is achieved.

In this video a Dewalt heat gun is used to join two pieces of copper pipe using a solder ring fitting. As the solder begins melting into the joint use the heat of the torch to draw solder in and apply sufficient solder so it just starts to form a bit extra on the bottom. Remove Flame from Fitting.