How To Solder Automotive Wires Together

Use nothing but 60-40 rosin-core solder intended for electrical wiring.

How to solder automotive wires together. Use sidecutters or sleeving cutter to cut a ring in outer insulation without cutting wires at all. A pig-tail where the wires are bent at a 90-degree angle to the rest of the wire is NOT a suitable connection and will cause problems dont do it. Dec 8 2010.

Keep touching the solder to the wires until the wires are hot enough to melt the solder. The challenge is holding the wires in place long enough for the solder to cure. First strip the sections of wire you plan on soldering together.

Automotive wiring should be soldered and protected properly in order to withstand all types of weather rain snow and salt. Heres the right way to do it. Solder Wire Automotive Service Technician 4 Youth Explore Trades Skills Activity 1.

This is pretty basic and there are two ways of doing it. I will show you how to solder wires together the right way to seal the solder joint with heat shrink is a must and you also need to make sure you do not have a cold solder joint. Cut the electrical wire into two 6 long pieces.

Join Two Wires Using Solder 1. Put a little solder on the tip of the iron to bridge the gap between the iron tip and the wires to be soldered. Tin the end of both wires by clamping them in your third hand jig and holding the iron under the wire and allowing solder to flow into the wire.

Electrical tape or PVC shrink tube. -Take each single copper wire apart from each others. Keep the soldering iron on the bottom of the wire to continue heating it.