How To Solder 2 Small Wires Together
Put a little solder on the tip of the iron to bridge the gap between the iron tip and the wires to be soldered.
How to solder 2 small wires together. Use a thin solid wire 28 AWG-30 AWG and wrap it around both wires. Twist and fold 2. Just like you would do with two solid wires.
Heat the pads and melt a small amount of solder on to each pad and let it cool. Try using nail polish remover or other solvent to remove the coating. Keep touching the solder to the wires until the wires are hot enough to melt the solder.
If the wire is stranded use your fingers to twist the strands together. Automotive wiring should be soldered and protected properly in order to withstand all types of weather rain snow and salt. You might add a it more Bakers Fluid while this is going on.
To get started use wire strippers on the wire so you have bare wire exposed. With the wires you want to join twisted together and held in place pick up your soldering iron in one hand and your solder in the other. Using assisting hands or another form of clamp device is recommended for this process.
Add a comment. Obviously these should not be connected to a power source at the time. There are three common techniques to solder wires together.
Let it cool without being disturbed. Extending the heat shrink about 12 to 1 passed the solder joint on both sides. 1 Strip the wires of about 12 in.