How To Solder 2 Copper Wires Together

For low voltage applications fan out the copper strands and then twist them together.

How to solder 2 copper wires together. How to Solder Two Small Wires - YouTube. Using assisting hands or another form of clamp device is recommended for this process. Cut the two wires to be soldered together to the appropriate length as needed for your project.

Just like you would do with two solid wires. You shouldnt rely on solder for strength. This will heat the wire to allow your solder to melt.

Real tidy with needle nose and only requi. Youll get a straight wire that has a little sideways bump in it so get a larger shrink tube to isolate it youll need two times the diameter of one wire. Clean solid wire with emery cloth and remove any enamel if it was used to coat the wire.

Stranded wire cant be cleaned -- in this case youll need the soldering iron. Touch the tip of the soldering iron to the copper wires. Unlike welding were we melt the two metals together brazing or soldering use a filler material to bond the two parts together without melting them.

Cut the two wires in order to make sure that the copper core of the wire is not corroded or contaminated inside see image below. Place soldering iron under the wire. Strip both wires back by 810 mm.

They should be propped up off the workspace so you can have access to the area under the wires. Originally Posted by learningarduino. For this process its recommended to use helping hands or other type of clamp device.