What Can I Use To Clean Exhaust Tips

Vacuum the fan and motor assembly with the dusting attachment of your vacuum cleaner to get as much dust and lint as you can from these surfaces.

What can i use to clean exhaust tips. Chances are there will be fine pieces of rust on the chrome exhaust pipes. Use a solvent and wire rifle brush to clean threads followed by blowing with compressed air. Then use four ott steel wool on the inner lip to break apart the carbon.

Chemical cleaning such as a tar remover or a fallout remover. This time use vinegar as this will remove the more ingrained dirt that the soap hasnt been able to touch. Wash the exhaust tips with a mild cleaner and clean dry towels.

Use OOOO steel to further break down carbon deposit and hard water spots. Now its time to use some 0000 steel wool very fine grade with the CG Grime Reaper to clean out the insides of the exhaust tips. Use the strips to apply and work the polish like youre polishing your shoes.

Also if the block deck has been resurfaced make sure that the top of all female bolt holes are slightly chamfered to remove a sharp and possibly raised edge which could potentially be drawn upwards above the deck mating surface. To make any metal polish more effective first clean the metal surfaces with a solvent cleaner such as lacquer thinner mineral spirits tar remover etc. Save s on motorcycle cleaners.

This will remove initial carbon deposit and soot. A popular way to safely clean chrome or stainless steel exhaust tips is by using a dedicated exhaust cleaner followed by automotive-grade steel wool and a metal polish you can apply with a clean microfiber towel. It sounds like a lot of work but its only 2 or 4 exhaust tips and they usually clean up quicker than it took me to type this.

Use an auto wash or exhaust cleaner inside and outside of the tips. Repeat this process at least once a year to keep your grease filter and exhaust fan clean. Use a clean microfiber cloth to wipe away the excess soap and water.