Proper Way To Solder Two Wires Together

The only way to safely join two flexible mains leads is with an in-line screw terminal connection box.

Proper way to solder two wires together. Solder is a metal alloy with a low melting temperature point used alongside a soldering iron to permanently join together two metals with a higher melting point. How to Solder Stranded Wire to Solid Wire Cut the two wires to be soldered together to the appropriate length as needed for your project. How to solder standed wires like a professional.

Alternatively apply solder to stranded wire. Twist the wires together. The process of soldering is taking two or more wires and joining them together and then using heat to melt electrical solder connecting those two wires permanently.

Another technique of soldering two wires together is the lap splice. After making the repair let it cool slightly. A few tips and tricks to use when soldering is to first always make sure you do not have a cold solder joint make sure you are using the right solder for the job and always make sure you seal your solder joint from all types.

Hold the two tinned wires on top of each other and touch the soldering iron to both wires. The AlumiConn TM connector shown here is used to splice a copper pigtail wire together with one or two aluminum wires as a step in reducing the fire hazard associated with aluminum electrical wiring. Soldering Wires Together One of the first things I learned to do when I was being trained to solder was the proper way to tin and prepare wire for soldering.

Screenshot from YouTube video The wires are then twisted together after which they are folded back against the side of one of the pieces of wire as shown below. Lay them together overlapping at the soldered part then blob them together. Just like you would do with two solid wires.

The connection should not have any uneven globs of solder and the solder should penetrate both wires. So the following technique may be a good technique when soldering ticker wires. This video starts by showing the simplest technique for twisting two wires together which commences by baring the ends and overlaying them at 90 to each other as shown below.