How To Solder Two Wires Together
How to solder wires together.
How to solder two wires together. Tinning is the process of melting the solder around the wires. Put just enough solder to fill the joint. Keep touching the solder to the wires until the wires are hot enough to melt the solder.
Jamb the two ends together so that the individual strands of each bundle intermingle. On a basic level there are essentially two types of solder wire lead-free solder contains mix of copper and tin and leaded solder contains tin and lead. The most secure and durable way to splice two wires together is to solder them.
If you want you can add soldering resin to the wire filaments. Use tweezers pliers etc. Another technique of soldering two wires together is the lap splice.
This process should melt the solder and coat both wires evenly. --- Dont forget to slide a piece of shrink tube over one of the wires before you do all this. Use heat shrink to cover the connection.
Use nothing but 60-40 rosin-core solder intended for electrical wiring. The solder should flow freely onto the wire and coat it if its stranded wire the solder should flow into it and fill the wire. How to Solder Wires Together Best tips and tricks - YouTube.
Your solder will be applied opposite from the iron on top of the wire. Strip a short section of insulation off each wire end. To gather stray strands into the intermingled bundle.