How To Solder Two Electrical Wires Together

Just like you would do with two solid wires.

How to solder two electrical wires together. The wraps should be adjacent and close to each other. Use heat shrink tubing to provide a strain relief to your solder connection. Your solder will be applied opposite from the iron on top of the wire.

Remove the soldering iron and wait a few seconds to let the soldered connection cool and harden. First your wire connection should always be mechanically sound before you solder. So the following technique may be a good technique when soldering ticker wires.

Offer a Variety Of Connectors. Alternatively apply solder to stranded wire. There is one way to twist wires together for soldering- a horizontal twist that yields a continues length of wire.

Use rosin core solder. Be sure to use the correct solder electrical not plumbing and clean the joint with isopropyl alcohol prior to. Make sure the cable grips grip the outer sheath left not just the inner wires right.

For small wire form a shepherds crook in each wire to link them together or twist them together pigtail splice them solder. Heat the copper and apply solder to the side opposite the heating implement. RMA rosin flux is best.

Request a Quote Today. Meets The EU RoHS Directive 201165EU Claim. This will heat the wire to allow your solder to melt.