How To Solder 2 Wires Together

Twist and fold twisted helix and lineman splice.

How to solder 2 wires together. Another technique of soldering two wires together is the lap splice. You should not apply too much solder. The process also helps in the distribution of heat evenly throughout the wire.

This technique is good for both stranded wires and solid wires. Meets The EU RoHS Directive 201165EU Claim. Cut the two wires in order to make sure that the copper core of the wire is not corroded or contaminated inside see image below.

In this you have to use a soldering iron and melt the solder into the filaments. The most secure and durable way to splice two wires together is to solder them. There is one way to twist wires together for soldering- a horizontal twist that yields a continues length of.

By first joining wires together you can solder them in place for a strong connection. Strip both wires back by 810 mm. This process should melt the solder and coat both wires evenly.

Put a little solder on the tip of the iron to bridge the gap between the iron tip and the wires to be soldered. Remove the soldering iron and wait a few seconds to let the soldered connection cool and harden. Use nothing but 60-40 rosin-core solder intended for electrical wiring.

Hold the two tinned wires on top of each other and touch the soldering iron to both wires. Why is solder used for joining electrical wires. Use rosin core solder.