How To Remove Oxidation From Solder Tip

How to Clean Soldering Iron Tip.

How to remove oxidation from solder tip. If the tip temperature is too high oxidation occurs. In this way you can adjust the variac control and get a feel for the precise temperature that will create a good solder flow and yet maintain a. Be careful not to get a thermal shock while doing this.

We recommend the use of the Hakko 599B Tip cleaner as it can remove oxidation from the soldering tip without removing the solder or exposing the tip to harsh chemicals or thermal shock. This article will discuss what causes mild and severe oxidation on soldering iron tips how to remove it and what are the ways to prevent it. Always tin your tips before turning off the iron to keep it ready and primed for proper wetting.

This can be used to clean mild oxidation by covering the tip. Wipe OFF the solder on the Cleaning Sponge or Copper Wool. How to clean an oxidized soldering tip.

You can remove oxides easier by wiping the soldering iron tip in a wet sponge. With a clean soldering iron tip. Repeat this process for about three or four times until the soldering irons tip is clean.

The best way is to prevent the soldering iron tip from oxidizing. Each time you clean the soldering iron and put it away apply a fresh solder to the tip. This will slowly start to remove the oxidation present on the soldering iron.

Use a damp sponge to wipe away the black oxidation from the tip of the soldering iron until the tip is silver and shines in the light. The recommended temperature range of 250C to 300C will allow the flux of the solder to be activated not burned and will start the chemical reaction to remove the oxidation. Contamination of boards is the problem of the board fabricator and should fall within warranty of their product.