How To Remove Earphone Jack From Phone

There should be some lint on the tip.

How to remove earphone jack from phone. Check audio settings and restart the device. Aim the nozzle directly at your headphone jack. Make sure your headphones arent broken.

Hold for 2-3 minutes or until the melted plastic has thoroughly cooled. Most headphones have a standard 35-mm jack that is plugged into a standard 35-mm audio port found in most laptops smartphones and portable speakers. Follow this guide and even so it was written for a 3G all the points are still pertinent to your phone.

Apply a little side pressure and. After you removed those clean the whole board connectors and all with 90 isopropyl alcohol. Used pin straightened tool to free the edges of the headphone male jack from the female internal jack.

Thanks iFixit you are amazing. Once you are sure it has dried and cooled remove the ink tube and voila. If you do not remove those you might as well not do anything.

Use a 116 drill bit. Disassemble your phone using these guides. Press the button to blast dirt dust and lint out of the jack.

You can then carefully put superglue. Pull the bit gently out. Now insert the melted tip of the ink tube into the headphone jack and press firmly.