How To Properly Solder Wires Together

Place soldering iron under the wire.

How to properly solder wires together. Learn How to Solder Correctly. Preload the Soldering Iron Tip with Solder Wire. Youll see how to strip the wires add heat shrink splice the wires together solder and melt the heat shrink to make a perfect soldered connection.

Tin objects that you intend to solder together by holding the soldering unit tip at a slight angle with the line of the chisel point parallel to the side of the work. They should be propped up off the workspace so you can have access to the area under the wires. You interweave the threads of the wires together before soldering the joint solid.

This will heat the wire to allow your solder to melt. The challenge is holding the wires in place long enough for the solder to cure. The process for soldering 3 wires together is the same as splicing 2 4 or even 10 of them.

Once cooled and hardened the resulting soldered bond or joint is considered to be permanent. Some say its better to joint the two wires using a Y-splice while some only swear by the good ol rat tail splice. Apply Solder Flux to the Wire Joint.

Secure both sides of the rejoined wire so they wont move when touched with the iron. Solder the Wire Joint. When the Solder is melted it will automatically create a strong bond between the connector and wire.

Using a Wire Stripper Strip the Wires to Desired Length. The second joint will likely go quicker than the first one. Hold it on the wire for 3-4 seconds.