How To Prepare Soldering Iron Tip

Begin by making sure the tip is attached to the iron and screwed tightly in place.

How to prepare soldering iron tip. This process will help improve the heat transfer from the iron to the item youre soldering. Then of course you need to tin the. Well when the iron soldering warms up the iron plating which is the working surface would start oxidizing due to the temperature.

Apply very little flux in the solder joints and make the soldering. Your goal is to remove old solder from the tip. At this point the solder will float freely around the component lead and the pad.

Hold the solder to the tip while its heating up to make sure you tin the tip before it has a chance to turn black. To maintain the performance of any soldering iron tip a simple maintenance procedure is recommended. Heat from the solder tip will activate the flux and start the chemical reaction that removes oxides.

Operating at temperatures exceeding 850F dramatically increases the formation of iron oxides which. Search Findchips and Save Today. This step will coat the iron in a mixture of flux and solder.

It warm up and then melting solder on it so it covers the tip. This should lead to a clean shiny tip ready. Typically advised to be conducted after unpacking a brand new tool here are the steps on tinning a soldering iron.

Once the pads surface has been fully coated you must stop adding solder and quickly remove the soldering iron. Make sure you clean and tin the tip of the soldering iron to make the most of it. So when its heating up you must apply solder 60 tin 40 lead to the tip and this process is called tinning the tip.