How To Make A Soldering Iron With A Nail

So yea find a coil that works is going to be next to impossible.

How to make a soldering iron with a nail. The Heating tip consists of two parts. Choose two points which will be soldered together. For its manufacture will require.

- once the soldering iron is heated up 30 seconds you can dab instantaneously. Aaron Cakes soldering tutorial states If you leave any part of the tip uncovered it will tend to. It stays on pretty much all day long.

In this Instructables we are gonna make a 25 W soldering Iron. Cut the pen into the preferred shape using a file and your primary concern should be finding a way to insert the metal where the pens tip was initially. The PID controller has a few setting that need to be tweaked.

If necessary keep repeating this process until you are done. Once you do that you put a dab of your concentrate onto a domeless nail and touch the heated soldering iron tip to it to vaporize it. The high strength steel alloy on the other hand would also have superior oxidation and corrosion resistance over the soft copper at the normal temperatures that a soldering gun works at.

Twist the wire ends of the two points to be soldered together into a J shape. Id have to say this method seems superior in all ways to using a butane torch. Join the two nails together permanently at the cross point using silver bearing solder.

Now there is a lot of soldering heating element ranging from 15 W to 100 W each having a different application use. Using the HE Nail Insert now Ive been using my DIY e-nail exclusively for a few months now. Given the short stout design of a normal soldering tip one being made of high strength alloy steel like a masonry nail Vs an all copper tip the thermal conductivity difference would be negligible.