How To Maintain Solder Tip

Maintenance and inspection of station-type soldering.

How to maintain solder tip. Maintenance and inspection of soldering pots -Case 1-SOLDERING POT. Clean the soldering iron tip regularly. Using the proper type of flux will allow for optimal performance of your soldering iron tip and prevent the risk of oxidation which helps maintain the tip.

A soldering tip should be regularly cleaned and tinned and take an abrasive to it as needed to keep it smooth and free from pitting. The maintenance of a soldering A soldering iron tip should be cleaned regularly by removing any oxidized solder flux residue and debris from the tip. Then slide the retaining nut over the tip and sleeve and tighten it using your hands.

Fit the new tip into the retaining sleeve and screw it back to the heating element. And DONT use your soldering iron or gun on wood plastics etc at least not with the same tip you intend to use for soldering. When performed properly they will not only ensure the longest possible working life for your soldering iron tips but they.

This will remove any oxides are in the tip. This step will coat the iron in a mixture of flux and solder. And components for their thermal mass carefully and select the soldering tip that fits with them well.

Consider the size and shape of the PWB. When doing this I clean my tip regularly removing excess solder to improve. Clean tip on solder wool.

Its also recommended that operators - do not rub the tip on the metals to be joined also do not add solder directly to the tip - proper soldering requires that the operator feed solder to the joint. To maintain the performance of any soldering iron tip a simple maintenance procedure is recommended. Apply a bit of new solder so that all surfaces are coated.