How Do You Solder Two Small Wires Together

Now that the two tinned wires are wrapped around each other we can re-apply the soldering iron and the solder from each wire will melt and mingle forming a nice solid solder joint.

How do you solder two small wires together. Make sure the soldering iron is placed where you wont accidentally bump it. You want the wires to be flexible so that you can bend them while joining and splicing. When done properly you have a strong conductive connection that turns two separate wires into one.

I typically solder the wires after performing the twist and before folding the connection back against the side of one of the pieces of wire. Keep the iron in place and touch the solder to the. Begin by removing the insulation from the ends of both wires you are soldering together.

Place soldering iron under the wire. Solder the Splice Together. Add a comment.

Set up your work area so everything is within easy reach. A solder join - wires twisted together not so good. They do tend to be a little lumpy and look a tad misshapen under the heat-shrink tube.

For low voltage applications fan out the copper strands and then twist them together. Install the shrink wrap first solder the wires then slide the wrap to cover the solder shrink the wrap with a flame careful the wrap can shrink too much and split open then you. Let the solder melt and flow over the wires.

I will be using a power probe butane soldering gun. Use rosin core solder. You should carefully remove 12 inch of the wire insulation about 1 inch back from the stripped end of your wire.