How Do You Solder Small Wires

Place the tip of the soldering iron against the solder pad.

How do you solder small wires. Tap the end of the 6337 solder on top of the wire splice so the solder melts down into the wires. Remove both the solder and the soldering iron tip from the connection as soon as enough solder melts onto the pad. There are small lies big lies and then there is.

You could also twist them before soldering to increase mechanical strength. Step 4 - Place the Two Stripped Ends Together. Keep the iron in place and touch the solder to the wire until its fully coated.

Pinch the wire tip between the solder and the iron tip to tin and flow the wire end. To do this heat up the soldering iron and touch the solder to the tip of the iron so that you cover the tip in a thin layer of solder. If you are working with a small heat source such as a candle or a lighter you need to use a small soldering iron like the tip of old scissors.

Step 1 - Turn Off the Power. If you do need to use a littleadditional solder use the very thin kind about 2. When joining 2 larger gauge multi-strand wires together I normally spread the strands first and push the 2 wires together head to head then twist them so they dont come off easily.

Perhaps you have a small electronic device such as a toy with one broken wire. If youre using a new soldering iron you have to tin the tip. This tool worked the best for me in the automotive application and make it a breeze get that tuff to reach wires repaired soldered and sealed properly.

This will heat the wire to allow your solder to melt. Hold it on the wire for 3-4 seconds. Then touch the tip of the soldering iron to the bottom side of the wire so the solder pool is in contact with the wire.