How Do You Make Your Own Soldering Iron

If you see any solder splashes after just flick it off with you finger nail not the soldering iron.

How do you make your own soldering iron. This soldering station has almost identical features to the Weller WLC100 but is also bundled with a roll of solder a solder sucker and a selection of different tips. All you need to make an iron on transfer is a photo or large clip art picture a color printer and plenty of ink a word processing program or graphics editing program a package of iron on transfer paper. Its easy to make your own iron on transfers using free clip art or a favorite photograph and special transfer paper you run through your inkjet printer.

Apply lots of solder to one side of the resistor then quickly melt the other side and flick it off. Add flux and try 450. Use the small needle tip bottles to apply the flux to your projects.

I just slide a blade in to pry it open a little and slide a new one in. The flux cleans the pad and makes it easier for the solder to fasten properly. Apply some solder to the tip of your iron and touch the circuit board pad with the tip so that some of the solder passes on to the pad.

Safety tip 2 of 3. The box should be as wide and as long as the iron that it will hold. If so you can do it with a normal soldering iron.

Make sure your soldered connections are NOT TOUCHING. High temp solder is unlikely on something class 1 like a mouse. Direct the tip of the flames blue cone toward the metal pieces and move the iron around the area surrounding the seam until the solder changes color and fills the seam.

Place the resistor in its place an hold it there with a pair of tweezers while you touch the soldering tip so that it heats both. How to Tin a Soldering Iron Tip or Re-tin an Old Soldering Iron Tip - YouTube. Ad Find 300 Million Products with Findchips.