Correct Way To Solder Wires

However solder diameter is determined by the gauge number.

Correct way to solder wires. The heat shrink should be cut so that it is about a 12 longer than the area to be soldered. Apply a little solder to the tip before applying heat to the twisted wires. It offers the lowest resistance and the best vibrationfatigue protection.

If you did the cable and the tag at the same time by the time the solder properly melted the wire insulation would have started to melt. First you need to strip the wires then add your heat shrink tubing physically connect the wiressolder the wires together and then shrink that heat shrink tubing to make a waterproof connection. You need to apply the heat to the metal part on the plug because that takes the longest to heat and melt the solder.

Correct procedure for soldering 2 wires together. You could use an automatic wire stripper like this whichis actually pretty nice. Electrical connections should be made by splicing wires together in a way that keeps the current flowing through the joints.

How To Solder Wires. Place the heat shrink over the wire and keep it away from the area to be soldered. Tin the tip of the iron and then clean it with a sponge before heating the wire.

The solder should be fed into the cool side away from the heat which allows it to be drawn in smoothly by the heat transfer through the wires. This process should melt the solder and coat both wires evenly. Connect or solder the electrical wires to rods.

Twist the wires together. Your basic average student will be working with through-hole PDIP packages hence gauges that work well are 18 20 and 21. Here is a quick lesson on soldering wires and using shrink tube.